Спілкуватися з постачальником? Постачальник
Megan Ms. Megan
Що я можу зробити для вас?
Чат зараз
Зв'язок з постачальником

JingHongYi PCB (HK) Co., Limited

Metal Core PCB Manufacturing Capability
Metal Core PCB Manufacturing Capability

Metal Core PCB / MCPCB

MCPCB, Metal Core PCB, thermal PCB - whichever name you prefer, they are all boards which use a base metal material as the heat spreader portion of the circuit board.

Metalcore PCB is abbreviated as MCPCB, it is made of the thermal insulating layer, metal plate and metal copper foil, which has special magnetic conductivity, excellent heat dissipation, high mechanical strength, and good processing performance. For metalcore base material, there are aluminum and copper base materials. Aluminum substrate is a kind of metal-based copper-clad plate with good heat transferring and dissipation function. The copper substrate has better performance than aluminum, but its price is relatively more expensive than aluminum.

In recent years, the LED industry has been rapidly developed, but the problem of heat dissipation has been puzzling the application and development of LED, especially high-power LED in the field of lighting. The application of the metal substrate provides a new way to solve the heat dissipation of LED effectively.

Clients order aluminum PCBs more often because the price of aluminum PCB is much more economic, they are used for LED lighting, audio frequency apparatus and communication electronic equipment.

Metal Core PCB | PCB manufacturing

Metal Core PCB Materials and Thickness

The metal core of the thermal PCB can be aluminum (aluminum core PCB), copper (copper core PCB or a heavy copper PCB) or a mixture of special alloys. The most common is an aluminum core PCB.

The thickness of metal cores in PCB base plates is typically 30 mil - 125 mil, but thicker and thinner plates are possible.

MCPCB copper foil thickness can be 1 - 10 oz.

Advantages of MCPCB

MCPCBs can be advantageous to use for their ability to integrate a dielectric polymer layer with high thermal conductivity for lower thermal resistance.

Metalcore PCBs transfer heat 8 to 9 times faster than FR4 PCBs. MCPCB laminates dissipate heat, keeping heat generating components cooler which results in increased performance and life.


Over the past several years LED-based products have become increasingly popular, and as a result, so too have metal core printed circuit boards. The automobile and lighting sectors have both embraced the technology, as have consumers, given an LED-based light can be about 5x cheaper to run than a comparable incandescent unit. Even compact fluorescents have slightly higher operating costs and they cannot compete with the smallest LEDs when it comes to efficient use of space.

As a result of these and other factors, more and more devices now incorporate LEDs as a major design feature. There is, however, one aspect of the LED operation that must always be accounted for in product designs: heat.

Metal Core Printed Circuit Board Advantages

In many ways, LEDs are like any other component that is mounted to a circuit board. If only a couple of LEDs are present such as green and red indicators for power-on power-off, then there is little reason to do anything unusual when laying out your PCB. However, there are lighting solutions that incorporate either rows or arrays of LEDs which remain turned on for long periods of time.

Keeping these devices cool so that they do not fail prematurely or create a safety hazard can become a major issue. Efficient cooling is also required to guarantee that light output remains consistent. Changing your PCB from a standard FR4 type to a metal core PCB (MCPCB), such as aluminum PCB, is an option worth considering.

Some advantages of a metal core PCB are that it uses special substrate materials which are specifically formulated to improve the reliability of designs that run at higher than normal temperatures. Instead of serving strictly as a mounting surface for the various components, the substrate actively draws heat from the locations of hot-running components through to the opposite layer of the board where it can dissipate efficiently and safely.

MCPCB has proven to be an excellent solution to the problem of how to cool a PCB which uses large numbers of LEDs. It is important to understand that there are differences between standard epoxy-glass boards and MCPCBs.

How Do MCPCBs Differ From Standard Epoxy Glass Boards?

One important difference to understand between standard PCB and MCPCB is how the materials work together to produce the desired result. In a typical LED MCPCB, there is a single circuitry layer of copper foil which is bonded to a layer of thermally conductive dielectric material, which is itself bonded to a thicker layer of metal – typically either Aluminum 5052, Aluminum 6061, or Copper C1100.

The dielectric material`s thermal conductivity is measured in Watts per meter, Kelvin (W/mK.) A 2.0W rating is fairly common; such material is approximately 6x-7x as thermally conductive as FR4. Best practice is to keep the dielectric layer as thin as possible. Doing so creates the shortest possible path from the heat source to the metal backing plate which is many times more thermally conductive than the dielectric material. Most of the materials come in a very limited range of thicknesses anyway, usually between .003" and .006". You won`t have all that much opportunity to specify something thicker that could diminish the effectiveness of the material at performing its thermal transfer function.

The metal backing plate used on the bottom side is the thickest element in the structure. It is available in several different thicknesses but it is best to use one of the three most common (1.0mm, 1.5mm, and 3.2mm) because they are the easiest to purchase without delays. The metal layer adds rigidity, keeps the circuit flat, and adds enough thickness so that the MCPCB can use the same mounting hardware that would be used for any other standard thickness circuit board. The metal plate side of the board does not receive any surface finish or solder mask.

Metal Core PCB Surface Mounted Components

A key factor to incorporate into your MCPCB design is to not use any plated through holes and instead use only surface-mounted components. The reason for this is that the bottom of the layer structure is a thick piece of metal so a plated through hole (or a non-plated hole with a conductive component lead inserted into it) will result in a short.

Most LED PCBs built on multi-layered (2+) FR4 substrates must use a pattern of closely-spaced plated through vias under each component to transmit heat. Solder can migrate through these vias during assembly if these are not filled, resulting in a less than perfect solder joint.

With MCPCB, the work of vias is done by the materials themselves. The entire bottom side is composed of metal with a much more efficient thermal conductivity, so cooling is enhanced and vias are not necessary for thermal relief. The result is that most MCPCBs require minimal drilling – generally just a few large mounting holes.

The elimination of via drilling and the ability to stack multiple panels for simultaneous drilling of large holes enables the fabricator to move your boards quickly through what is often a bottleneck operation within a PCB facility. Then, after a short drill cycle, your 1-layer MCPCB bypasses the electroless copper deposition (or graphite) hole wall preparation step that would be required for PTH processing and proceeds straight to circuit imaging. From that point forward, your MCPCB follows more or less the same process steps that any standard FR4 design would follow.

Metal Core PCB | PCB Fabrication

MCPCB Manufacturer Considerations

There are some processing considerations for MCPCB manufacturing, but as long as you understand the way the materials work and you keep your design to a single-layer SMT-only type, then designing your board should not be much different from designing any other single-layer PCB. If you find that you cannot route your design to a single layer, note that other MCPCB configurations are possible, although they fall outside of the scope of this piece. These include:
  • 2-layer, PTH boards with aluminum on the inside (which requires a costly pre-drill / fill with insulation / re-drill step to form plated through holes that won`t short.)
  • 2-or-more layer boards built per standard PCB processes, but using thermal dielectric material in place of FR4, and a metal backing plate laminated to the bottom for thermal transfer.
MCPCBs can be an excellent solution when cooling of multiple LEDs is a design priority. They are becoming more and more common in a variety of lighting applications – for home, workplace, and vehicle. Although they are subject to certain design restrictions, the fabrication process is not radically different from most other PCBs and is in some ways simpler.

FR4 PCB Vs. MCPCB Comparison

Conductivity: FR4 has a low thermal conductivity, typically around 0.3W, while MCPCB has a higher thermal conductivity, ranging from 1.0W-4.0W, most commonly around 2.0W.

Plated Through Holes: FR4 PCB typically uses plated through holes. Through hole components possible if required. In MCPCB, plated through holes are not available for 1-layer PCB. All components are surface-mounted.

Thermal Relief: Thermal relief in FR4 PCB typically involves vias for heat transfer. Longer drill cycle, adds many processes. MCPCB materials provide their own thermal relief. Via drilling, deposition, and plating processes are eliminated.

Solder Mask: FR4 PCB solder mask is typically dark colors (green, red, blue, black.) Usually applied top and bottom. MCPCB solder mask are almost exclusively white for LED boards. Applied to top only.

Thickness: FR4 PCB has a wide range of thicknesses available using various material combinations and layer counts. MCPCB thickness variation is limited by available backing plate thicknesses and dielectric sheet thicknesses.

Machining Process: FR4 PCB uses standard machining practices (drilling, routing, v-scoring, countersink, counterbore) while MCPCB uses the same machining as FR4, except that v-score must use diamond coated saw blades for the added strain from cutting into metal.

Additional Information

Metal Core Pcb China Manufacturers & Suppliers & Factory
Metal Base Pcbs China Manufacturers & Suppliers & Factory
Aluminum Metal Core Pcb China Manufacturers
Single Layer Metal Core Pcbs China Manufacturers
Multilayer Metal Core PCB China Manufacturer
Copper Base PCB Metal PCB China Manufacturer
Prototype Metal Core PCB China Manufacturer
Quick Metal Core Pcb China Manufacturers
Double Sided Metal Core PCB China Manufacturer

Список пов'язаних товарів




Про нас